Overhead conveyor - Manual monorail - 400 Series - Travelling bridge with lifting system
Overhead conveyor - Manual monorail - 400 Series - Semi-automatic formwork panel cleaning system
Rail section: 100mm×120mm×thickness 6mm.
Trolleys with steel bearing rollers.
Maximum operating temperature: 250°c.
The 400 series manual monorail can be motorised, using a trolley drive chain (see 2400 series power and free).
In the motorised sections, the manual monorail turns into a twin rail conveyor.
Brochure manual monorail 400 series
Specific equipment can be made on request. For example : integration of special lifting systems, weighing, load bars for transported parts etc.
Various part hooking methods are available, trolley hoists, load bar, double truck or related trolleys.
Here is a picture of a long trolley on a single small travelling crane travelling in a transfer conveyor.
The 400 series overhead conveyor for handling heavy loads can be set up as a travelling bridge crane.
Used here for overhead conveying to supply parts to be treated in a blasting machine, the suspended tray conveyors can also be set up under one, two or four trolleys thus increasing the conveyor's admissible load.
With an electrical supply rail, the conveyor can accommodate a hoist.
The hoist may receive complementary motorisation for horizontal movements.
Heavy isolated load carrying, with an independent motor, self propelled truck.